Monday, November 5, 2012
1987-2006 Jeep Wrangler Fan Installation Instructions
1987-2006 Jeep Wrangler Fan Installation Instructions. This document shows you how to remove fan of Jeep Wrangler year model 1987-2006. The fan removal and installation step : Step 1: Remove Existing Fan & Shroud, Step 2: Mount Side Brackets to Shroud, Step 3: Overflow Bracket, Step 4: Locate mounting point for control, Step 5: Wire fan, Step 6: Mount fan assembly, Step 7: Wire the fan motors (refer to Wiring Diagram), Step 8: Wire the control module, Step 8a: Connect the motor wires to the control module, Step 8b: Disconnect the negative battery lead for safety while finishing the wiring, Step 8c: Use the large diameter black (10 GA) wire to run from the negative (-) battery terminal to the “G” terminal on the control module, Step 8d: Use the small diameter red wire (14 GA) to connect the “+” terminal on the control module to a positive power source, Step 8e: (Optional) For air conditioning control (if desired) connect the “C” terminal on the control module to the positive wire that triggers the A/C compressor using the small diameter green (14 GA) wire, Step 8f: (Optional) For manual switch operation, use Flex-a-lite p/n 31148, Step 8g: Use the zip ties provided to secure the wires and prevent them from interfering with fan blades, belts, and pulleys in the engine compartment, Step 9: Insert the temperature probe into the radiator fins, Step 10: Adjust the temperature control knob on the control box.
download from this www.flex-a-lite.com/auto/485-99485.pdfadvertisement:
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.