Monday, June 4, 2012
Wel-Bilt gas-fired water pump owner's manual
This machine is designed for certain applications only. Distributor shall not be liable for problems arising from the modification. We strongly recommend that this computer is not reconstructed and/or used for any application other than that for which it was made. If you have any questions relating to an application, do not use the computer until you have first connected the Distributor to determine if it may or must be carried out on the product. Keep the workspace clean without clutter and well lit. Cluttered and dark work areas can cause accidents. · Do not use your water pump where there is a risk of fire or explosion; for example, in the presence of flammable liquids, gases and dust. Petrol engines may create Sparks which may be dust or smoke. · Keep children and bystanders away while operating a water pump. Distractions can lead to loss of control, so that visitors must remain in a safe distance from the workspace. · You need to know for all electric lines, electrical circuits, water and other mechanical risks in your workspace, in particular those risks under the surface, hidden from view of the operator, who may inadvertently be contacted and may cause damage to property or personal injury. · Signal of Your surroundings. Use of water pumps in closed workspaces may apply a dangerous near the cutting tools and rotating parts. internal combustion engines pose special risks during operation and fueling. Read and follow the instructions, warning in the engine's manual and safety rules, which are below. Failure to comply with the warnings and safety standards, can lead to serious injury or death.
· Do not run the machine indoors or in a closed area as deep trench unless adequate ventilation is provided by elements such as exhaust fans or hoses. Exhaust gases from the engine contains poisonous carbon monoxide gas; exposure to carbon monoxide can lead to loss of consciousness and can lead to death. · No smoking while in the machine. · No smoking in recharging the vehicles engine. · Hot or running engine is not loaded. · NOT load engine near a naked flame. · DO NOT spill fuel when recharging the vehicles engine. · The engine near open flames is not running. · ALWAYS load the fuel tank in a well-ventilated place. · ALWAYS replace the cap on the fuel tank after recharge of vehicles. · Always check the fuel lines and tank for leaks and cracks before starting the engine. Do not run the machine if there are leaks fuel or fuel lines are free. · ALWAYS avoid contact with hot oil, fuel, exhaust gases and solid surfaces. here
advertisement:
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.