Pages

Monday, June 4, 2012

Manual Files » Home » » HONDA GAS With TRASH PUMP MODEL QP40TH PARTS And OPERATION MANUAL

HONDA GAS With TRASH PUMP MODEL QP40TH PARTS And OPERATION MANUAL

The reduced atmospheric pressure inside the pump allows water to pass through the suction line and in the pump body. Centrifugal force created by the rotating impeller pressurizes the water and expel it from the pump. Central heating, this trash pump is powered by the 11 horsepower air-cooled 4-stroke, single-cylinder HONDA GX 340-petrol engine, which includes the low "Oil warning function" oil warning function in the case of slight oil or no oil, HONDA GX-340 has a function to stop the engine built-in oil alarm. In the case of the oil level is low the engine will automatically stop. Pumps for trash pump trash derive their name from their ability to cope with the greater amount of debris and particulate matter than standard centrifugal pumps. These pumps usually handle solid up to 1/2 the size of the opening, which makes them less likely to clog up the disposal. Also trash pumps are able to withstand water, dry matter content of 25% by weight. The advantage of using the trash pump is that it can be easily and quickly, disassembly in the field without tools and easily cleaned when the sling. Suction lift pump that is intended to be used for dewatering applications and be able to suction lift up to 25 feet of sea level. Implementation of optimal suction lift kept the suction hose or line as short as possible. In General, always put the pump near the water as soon as possible. Pump for maintenance of the pump is always placed on sound fixed in a level position. Never place the pump soft soil. Inlet pipe or tubing connection is always checked for tightness and leaks. Small suction leaks in installations or hose can prevent priming the pump. Altitude elevations above 3000 feet will interfere with the performance of the pump. Because less atmospheric pressure at higher altitudes, pumps do not have ability to coating, that they have at sea level. A general rule is a pump for every 1000 feet of altitude above sea level will be lost one leg of the priming capabilities. For example, in Flagstaff, Arizona where elevation is about 7000 feet, would pump suction lift of only 18 feet instead of 25 feet of sea level.  here


advertisement:

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.